CUBIS is the World leader in preformed access chamber systems.
Active in Australia & New Zealand and more than 20 countries throughout Europe and the Middle East, CUBIS has a customer base that includes water and power utilities, telecommunications operators, rail networks and highway operators.
Our unrivalled range of products is availale at Burdens Australia.
Why use Cubis Access Chambers.
FAST
• Installed in as little as 30 mins.
• Quicker re-opening of roads, footways or rail tracks.
STRONG
• Unsupported 60 tonne vertical
loads achievable.
• Side loads comparable with
concrete.
SAFE
• All parts below 25kg.
VALUE
• No skilled labour or specialist lifting equipment necessary.
SUPERIOR
• Consistently factory produced to
ISO 9001.
• Not affected by frost, acids, alkalis
or diesel – all concrete killers.
FLEXIBLE
• Available in a range of fixed depth or modular designs.
• Duct entries quickly and safely formed on site or factory prepared.
• Overbuilding or benching is easily achieved.
• Clear opening sizes from 300mm x 300mm to 6000mm x 6000mm.
Stakka Box
STAKKAbox™ is a range of sectional, modular and structural preformed access chambers. Each chamber is made from 150mm deep stacking sections which interlock to offer flexibility in finished chamber depths.
The range has variants for footway and carriage/roadway installations.
To help choose the most appropriate chamber for your installation please refer to the strength definition to the left of each description.
Mono Box
MONObox™ is our range of single piece, structural preformed access chambers. Each chamber is produced in a single piece to allow the installer to very quickly and easily place the chamber, connect ducts and backfill.
The MONObox™ range does not require a frame to keep the cover in place as all are designed to fit the cover directly.
AX-S Covers
The CUBIS AX-S™ range of surface covers provide customers with a complete underground network access system as they are designed and manufactured from a range of materials to compliment our chamber ranges.
The AX-S™ range can be tailored to meet specified loading requirements from pedestrian up to carriageway duty and are available in a wide range of clear opening dimensions and depths.
AX-S Frames
AX-S™ frames are bespoke manufactured to meet the exact specification of projects. The range has been developed to offer installers tailored solutions to problems experienced on site.
On the whole they are faster to install and provide for easier maintenance over their installed life.
CUBIS is dedicated to providing effective solutions that match your exact needs.
Making use of our design and manufacturing experitise, we would be delighted to develop a new frame design to overcome your particular issue.
To download the Full CUBIS pdf brochure